SI-MT/SI-MKB/SI-HTB
WORLD PRECISION IN STRU MENTS
3
Features
This Signal Conditioning Amplifi er System offers eight expansion slots, confi gured at the
factory to meet your requirements.
NOTE
: The system is confi gured at the factory. If you need to add additional modules,
contact Technical Support at 941.371.1003 or [email protected].
Cautions and Warnings
WARNING: TURN OFF THE SIGNAL CONDITIONING AMPLIFIER SYSTEM AND
UNPLUG IT FROM THE POWER OUTLET BEFORE REMOVING OR INSTALLING
ANY MODULE IN THE UNIT.
Parts List
After unpacking, verify that there is no visible damage to the instrument. Verify that all
items are included:
(1)
Signal Conditioning Amplifi er System
with an
SI-BAM21-LCB
(1) Power cord
(1) Instruction Manual
OPTIONAL COMPONENTS:
SI-TCM2B
Temperature Control module
SI-MOTDB
Linear Motor Control module
SI-PF100
Programmable Filter module
SI-AOSUB
Anti-Oscillation module
SI-SARCAM
Sarcomere Spacing module (For use with the Muscle Tester only.)
SI-COLU
Constant Load Unit
Unpacking
Upon receipt of this instrument, make a thorough inspection of the contents and check
for possible damage. Missing cartons or obvious damage to cartons should be noted on
the delivery receipt before signing. Concealed damage should be reported at once to the
carrier and an inspection requested. Please read the section entitled “Claims and Returns”
on page 44 of this manual. Please contact WPI Customer Service if any parts are
missing at 941.371.1003 or [email protected].
Returns:
Do not return any goods to WPI without obtaining prior approval (RMA #
required) and instructions from WPI’s Returns Department. Goods returned (unauthorized)
by collect freight may be refused. If a return shipment is necessary, use the original
container, if possible. If the original container is not available, use a suitable substitute
that is rigid and of adequate size. Wrap the instrument in paper or plastic surrounded with
at least 100mm (four inches) of shock absorbing material. For further details, please read
the section entitled “Claims and Returns” on page 44 of this manual.
