MityFlex
World Precision Instruments
5
Fuse Installation
1. Disconnect power to pump.
2. Find the power socket on the back of the case.
3. Pull the power cord out.
4. Slide the drawer below the receptacle out toward you.
5. Remove old fuse and replace with new fuse.
6. Push drawer in until it locks in place.
Motor Brush Replacement
1. Disconnect power to pump.
2. Remove case cover by removing 8 screws.
3. With a flat head screw driver, remove the brush caps on both sides of the DC motor.
4. Remove old brush and replace with new brush. (Slide in horizontally)
5. Push metal plate on the end of the brush inside. Hold it while replacing brush cap.
6. Replace case cover.
Summary of Contents for MityFlex
Page 2: ......
Page 4: ...ii World Precision Instruments...
Page 10: ...6 World Precision Instruments DECLARATION OF CONFORMITY...
