2
World Precision Instruments
Parts List
After unpacking, verify that there is no visible damage to the sensor. Verify that all
items are included:
(1)
ISO-HPO-2
H
2
O
2
sensor
(1) Probe Unpacking Instructions (Read this before handling the probe.)
(1) Spare membrane sleeve
(1) 1 cc Syringe
(1)
MF28G67
MicroFil
(1)
100042
10mL vial of filling solution
(1) Instruction Manual
(1) Sensor Performance Evaluation
Unpacking
Upon receipt of this sensor, make a thorough inspection of the contents and check
for possible damage. Missing cartons or obvious damage to cartons should be noted
on the delivery receipt before signing. Concealed damage should be reported at once
to the carrier and an inspection requested. Please read the section entitled “Claims
and Returns” on page 11 of this manual. Please contact WPI Customer Service if any
parts are missing at 941.371.1003 or [email protected].
Returns:
Do not return any goods to WPI without obtaining prior approval (RMA
# required) and instructions from WPI’s Returns Department. Goods returned
(unauthorized) by collect freight may be refused. If a return shipment is necessary,
use the original container, if possible. If the original container is not available, use a
suitable substitute that is rigid and of adequate size. Wrap the instrument in paper or
plastic surrounded with at least 100mm (four inches) of shock absorbing material. For
further details, please read the section entitled “Claims and Returns” on page 11 of
this manual.
INSTRUMENT DESCRIPTION
combination
working / counter
electrode
probe
handle
stainless steel
sleeve
gas permeable
membrane
connection
to meter
locking cap
Fig. 2—The locking cap slides over the sensor sleeve. The sleeve is filled with electrolyte and
slides over the ISO-HPO-2 electrode. The locking cap securely attaches the sleeve to the
sensor handle.
Summary of Contents for ISO-HPO-2
Page 2: ......
