Rev 1.0/2-21
MRTALP4-DC3: #35058AUS
27
A
FTER
U
SING
THE
L
IFTER
1)
1A
Press the power button (
— fig. 1A) and
the “function” button (
— fig. 1A) to
power down the vacuum lifter.
2) Charge the battery after each workday as
).
1
3) Use the hoisting equipment to lower the
lifter gently onto a stable support. Then
detach the hoisting hook from the lift
point.
Caution:
Do not set the lifter on surfaces
that could soil or damage vacuum pads. If the lifter has VPFS10T pads, protect their
sealing rings by making sure each pad rests on spacers.
2
Transporting the Lifter
Secure the lifter in the original shipping container with the original shipping materials or
equivalent.
Storing the Lifter
1)
1B
Use the covers supplied to keep the vacuum pads clean (fig.
1B).
2) Charge the battery completely and repeat every 6 months
).
1..... To maximize battery life, charge it promptly after each use.
2..... If the lifter has VPFS10T pads, cardboard spacers are integrated into the original shipping container. Similarly shaped spacers should be used
when setting the lifter on other surfaces.
OPERATION
