Company:
WOYO Smart Technology (Shenzhen)Co., LTD
Website:
WWW.WOYOSMART.COM
Phone:
0086-755-3295 6611
Language
:
English
4
Tool Safety
1.Before plugging in the heating inductor, make sure that the outlet voltage supplied is
compatible with the voltage marked on the label and within 10% of the stated voltage. An
outlet voltage incompatible with that specified on the label can result in serious hazards and
damage to the heating inductor.
2.Ensure attachment is securely located. Coil and main are firmly tightened before use.
3.Do not use the heating inductor for longer than the stated duty cycle: 5 minutes on followed
by 5 minutes off. The main circuit board has an overheat protection device, however the
attachments do not have overheat protection so should not be used for more than 5 minutes of
continued use.
4.Please ensure that the cooling fan is running when the trigger is activated, if the fan does not
run do not use the heating inductor and contact our distributor or WOYO SMART CO.,LTD.
5. When using the flexible soft coil, 3 to 4 coils is the optimum number needed for best
operation.
6.Do not leave the coil plugged into the HBR main when not in use.
7. Do not attempt to repair the HBR by yourselves. Please contact our distributor or WOYO
SMART CO.,LTD.
Personal Safety
1.If you have a cardiac pacemaker or any other kind of electronic or metal surgical implant
DO NOT operate this tool, and always stay at least 1 metre (three feet) away from anybody
operating it.
2.Although the magnetic fields emitted by the tool only travel a few inches, they pose a
dangerous risk to the proper operation of all implanted medical electronic devices in the user
and any bystanders.
3.Do not operate the heating inductor while wearing any metallic items such as jewellery,
(including ring, watches, chains, identification tags, body piercing) or belt buckles.
4.Do not wear clothing that contains metallic rivets, waistband buttons, pocket buttons or zips
when operating the heating inductor.
5.Fumes and smoke from hot/burning adhesives are toxic. Wear an appropriate dual filter (dust
and fume) mask.
6.Always wear heat-resistant gloves when using the heating inductor as it heats metal very
quickly. It can be easily burn your hands and fingers when trying to remove parts from hot
metal surfaces.
7.Do not touch the coil, rope coil when the heating inductor plugged into the socket.
8.Coils will be hot after use, please unplug the unit and wait for cooling down before fitting/
removing.
Company:
WOYO Smart Technology (Shenzhen)Co., LTD
Website:
WWW.WOYOSMART.COM
Language
:
English