HDBaseT 1x4 Splitter Kit ( PoH )
18
7. EDID Management
The Extended Display Identification Data (EDID) is used by the source device to match
its video resolution with that of the connected display. By default, the source device
obtains its EDID from the first connected display. However, since the displays with
different capabilities can be connected to the splitter, the EDID DIP switch can be used
to set the EDID to a fixed value.
Switch Status
Description
L.RES
The splitter reads EDID from all connected displays, and then
the source device will automatically obtain the EDID which
contain the lowest resolution.
DEFAULT
Reset to the default EDID to distribute 4K@30Hz video.
H.RES
The splitter reads EDID from all connected displays, and then
the source device will automatically obtain the EDID which
contain the highest resolution.
Note:
When the four displays have the same resolution parameter, the source device
will obtain the EDID with priority from HDBT 1 to HDBT 4.
