Woxcon SCU42, User Manual, Page: 17 / 18

4x2 HDMI 2.0 Presentation Switcher with Matrix Outputs
15
[PARAM] [PARAM]= Passive, Active
Passive: The HDCP version of output
follows the HDCP of input source.
Active: The HDCP version of output is up to
1.4
<HdcpOutput Passive
>GetHdcpOutput Get HDCP output mode.
<HdcpHdmiOutput
Passive
8.3 EDID Setting Commands
Command Description
Command Example
and Feedback
>SetUpdateEdid
Upload user-defined EDID. The EDID DIP
switch should be set as “1111”.
<User EDID ready
Please send EDID data
within 10 seconds
...
<UpdateEdid True
8.4 Audio Setting Commands
Command Description
Command Example
and Feedback
>SetAudioSrc [PARAM]
Set the audio source of analog audio and
SPDIF audio.
[PARAM]= 1, 2, 3, 4
1: OUTA de-embedded
2: OUTB de-embedded
3: OUTA ARC
4: OUTB ARC
>SetAudioSrc 1
<AudioSrc OutA De-
embedded
>SetSpdif [PARAM]
Mute/unmute the SPDIF audio output.
[PARAM]=Mute, UnMute.
>SetSpdif Mute
<Spdif Mute
>SetIis [PARAM]
Mute/unmute the analog audio output
(3.5mm jack). [PARAM]=Mute, UnMute.
>SetIis UnMute
<Iis UnMute
>GetAudioSta Get audio status.
<AudioSrc OutA De-
embedded
<Iis UnMute
<Spdif Mute