4x2 HDMI 2.0 Presentation Switcher with Matrix Outputs
9
1) When the specifications of output A and output B display devices are same, set the
EDID to
Global Mode
. When switch same input to output A and output B, because
the supported resolution (4K@60Hz 4:4:4) of two outputs are same, the input
source device will not reread the EDID of display device to ensure non-flash screen.
2) When the specifications of output A and output B display devices are different, set
the EDID to
Out B Private Mode
, and the Out A is in
Pass-through
mode.
ü
When switching the input source of output A to output B, because the input
source device will first learn the EDID from output B, so the two output displays
will flash before the image appears.
ü
When switching the input source of output B to the output A, because the input
source device will first learn the EDID from output B, so the display device of
output B doesn’t flash, but the display device of output A will flash before the
image appears.
6. IR Remote Control
Connect IR receiver to the
IR EYE
port, the switcher can be controlled by the following
IR remote.
①
1-4:
Press 1-4 button to select
corresponding input source for OUT A.
AUTO:
Press the button to enable auto
switching mode for OUT A.
②
1-4:
Press 1-4 button to select
corresponding input source for OUT B.
AUTO:
Press the button to enable auto
switching mode for OUT B.
③
De-embedded:
Press A or B button to
select output A or output B de-embedded
audio for audio output.
ARC:
Press A or B button to select output
A or output B ARC audio for audio output.