8x8 HDMI 2.0 Matrix with Audio Matrix/ Downscaling/ AOC Supported
28
8.3.7 EDID Management
Command
Function
Feedback Example
EDIDMInit.
Restore the factory default EDID
data for each input.
All Input EDID Set Default!
System Initialization......
PTN1111
MUH88-H2
V1.0.0
Power ON!
Front Panel UnLock!
EDIDUpgrade[x
x].
Upgrade EDID via Serial Port
l
[xx]=00~08
xx=01~08 is the number of the
port(able EDID user-defined for
corresponding HDMI input), if the
xx=00, it means all ports(able EDID
user-defined for all HDMI inputs).
Note:
EDID user-defined can be
used once, if switch to another EDID
or exit, it will not be saved.
l
[xx]=U.
xx=U means user-defined for built-in
EDID(It can be saved in machine for
using at any time).
Note:
It can user-defined only one
built-in EDID, after finishing it,
machine still use previous built-in
EDID.
When received commands, machine
will remind EDID file (.bin) to send
within 10 seconds.
Note:
In order to guarantee the data
to be normal received, need to
disconnect all HDBaset before
sending the command(s)
File size: 256
Baud rate:115200bps
Quired time: About 0
second
Please wait...
Send Completed
！
User
Define EDID Upgrade OK
By RS232 Or GUI!
EDID/[xx]/[yy].
Input ports xx use built-in EDID yy
[xx]=00~08
xx=01~08 is the number of the input
Input All EDID Upgrade
OK By 09 Internal EDID!
