8x8 HDMI 2.0 Matrix with Audio Matrix/ Downscaling/ AOC Supported
20
8. RS232 Control
8.1 RS232 Control Software
l
Installation
Copy the control software file to the computer connected with
MUH88-H2.
l
Uninstallation
Delete all the control software files in corresponding file path.
8.2 Basic Settings
Firstly, connect MUH88-H2 with necessary input devices and output devices. Then,
connect it with a PC installed RS232 control software. Double-click the software icon to
run this software.
Here we take the software
CommWatch.exe
as example. The icon is showed as below:
The interface of the control software is showed as below:
Set the parameters (baud rate, data bit, stop bit and parity bit) correctly to ensure
Parameter Configuration
area
Monitoring area, indicates
whether the command
sent works.
Command Sending area
