Wow WAC 2200, Instruction Manual

Page: 11 / 221

INSTRUCTIONS MANUAL
pag.11 - 12/11/2015
The operator tasked with operating, supervising, and maintaining the machine must not:
1. Use the machine if they have not been trained and informed beforehand as called for
by the law on safety in the workplace
2. Fail to act as described in the operating instructions.
3. Allow unauthorized people to approach and/or use the machine.
4. Tamper with the moving and fixed guards that provide perimeter protection, thereby
also exposing other operators and people to risks of a residual nature.
5. Remove or alter the safety signs (such as pictograms, warning signs, and others) on
the machine.
6. Use the machine without having first read and understood the behavioral, operating
and maintenance information contained in the operating instructions.
7. Leave the maneuvering keys on the electromechanical controls (selectors), pneumatic
controls, and doors of the housings for electrical and electronic materials (electrical
panels and derivation boxes).
8. Carry out the following operations as they pose residual risks:

Adjust the mechanical, pneumatic, or electrical parts on the machine while it is
working.

Remove the mechanical, pneumatic, or electrical parts on the machine while it is
working.

Remove the protective devices for mechanical, pneumatic, or electrical parts on the
machine while it is working.

Allow the machine to run when the electrical panels are open.
These uses, that cannot be avoided by way of construction, must not be allowed.
9. If service station fall down, or is hit, or in case of big leakage, or sounds of flowing gas:

an internal damage could happen, also if externally the machine seems good, and it
is still working;

the machine must be taken outdoor or in a very ventilated place.

No fire, no smoke, no workers, no cars nearby this service station.

The service station must be fully tested by a trained technician before to be used
again.
WARNING
The employer (or safety manager) is obliged to see to it that the machine is not
used in an improper manner, putting the health of the operator and people
exposed first.
The operator is obliged to inform their employer (or the system safety manager)
if there is a danger of improper use of the machine since, as an instructed
person, the operator is responsible for the use that is to be made of the
machine.