40
Operation
The scan will begin when a signal is received. The scan will stop when the signal ends
and resume from where it left off the next time the signal is received, until it identifies
the correct tone.
Use the [UP]/[DOWN] arrow keys to scan in a different direction. Use the [PF2] side
key to toggle between scanning the standard CTCSS, positive DCS, and negative DCS
tone list. See the TONE-SCAN menu item (page 61) for more information.
Key Lock
The buttons on the KG-XS20G can be locked to prevent them from being accidentally
pressed. When the Key Lock is enabled, all buttons except the [PF1], [PF2], [#LOCK]
and PTT keys will be disabled. The Channel knob will also be disabled.
To activate the Key Lock, press and hold the [#LOCK] key for two seconds. The key
Important
TONESCAN must be activated while a signal is being received on the channel.
