manualshive.com logo in svg

Wouxun KG-XS20G, Owner'S Manual

Share
Download
Wouxun KG-XS20G Owner'S Manual Download Page 20

20

Installation and Setup

Connecting an Antenna

Before using the transceiver, you must correctly connect a properly tuned and installed 

antenna. To get the best results, be sure the antenna is tuned for the frequencies that 

you intend to use, and the antenna’s impedance is 50 ohms. 

Using an incorrect or 

improperly installed antenna could harm the transceiver. Never attempt to transmit 

without an antenna connected!

The transceiver is equipped with an SO-239 (UHF female) antenna connector. It will 

require an antenna cable with a PL-259 (UHF male) connector.

Optional Connections

12V Vehicle Power Adapter

The KG-XS20G includes a 12V vehicle power adapter for use as an alternative to the 

hardwire installation. 

Note: The KG-XS20G typically draws less than 4�5 amps of 

power when in use on high power� Confirm that your vehicle’s accessory port uses a 

minimum 10 amp fuse before attempting to use the 12V power adapter�

Summary of Contents for KG-XS20G





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands