6
JOINTED ARM AWNINGS
www.woundwo.com
EXTENDING THE AWNING:
Press (and hold) the operating element and extend the jointed arm awning until it reaches either the desired or the
end shading position. The end position is reached when the motor switches off.
RETRACTING THE AWNING:
Press (and hold) the operating element and retract the jointed arm awning until it reaches either the desired or the
end shading position. The end position is reached when the motor switches off. Please refer to the documentation for control and operating units
for additional notices about special functions.
Improper assembly activities can result in personal injury or property damage.
When the system is being handed over, specialist staff must provide instruction on operating the electric drive. During this process, an
explanation of how the operating elements are assigned is provided.
Use suitable climbing aids and de-energise the drive motor!
Remove the cover for the lateral part from the cassette before cleaning the TRENDLINE SMARTBOX!
No high-pressure cleaners, scouring agents or scouring pads should be used for cleaning!
Solvents such as alcohol or benzine must not be used!
7.3 OPERATING JOINTED ARM AWNINGS WITH AN ELECTRIC DRIVE
8. CLEANING AND CARE
10. DISASSEMBLY
CLEANING THE PRODUCT:
Dirt can be removed from the jointed arm awning using a soft brush or hand brush. Clean the awning cloth using a fine liquid detergent and
rinse thoroughly with cold water. The frame of the jointed arm awning can be cleaned using a commercially available cleaner and wiped with a
damp cloth. The awning cloth must be left to dry after cleaning.
Only have a
WO
UND
WO
specialist dealer perform disassembly work.
Please refer to the product instructions for assembly for specifications / notices.
Reliable and safe use of the jointed arm awning can only be guaranteed if the system is checked and maintained on a regular basis.
9. MAINTENANCE
The jointed arm awning is to be checked regularly for signs of wear and damage on the cover and frame. If damages are found, the specialist
dealer or a suitable servicing company is to be tasked with the repair work. Jointed arm awnings needing repair must not be operated.
