Wottan motor STORM-S 300cc User Manual Download Page 13

Page: 13 / 85

Page

/ 13

Wottan Motor

SAFETY > TRANSPORTED CARGO

The performance of the vehicle varies depending on the load being carried and its arrangement. Overloading

affects the stability, steering and safety of the vehicle.

For your safety, do not exceed the specified load limits under any circumstances.

Be especially careful when transporting liquids that could spill on the vehicle or damage other vehicles in

traffic.

If you use the rear luggage rack, be sure to secure items with strong straps or nets to prevent loss. Remember

that a bulky package is very sensitive to wind, causing instability in the handling of the vehicle.

Be especially careful in side winds and when overtaking large vehicles such as trucks and buses.

Do not place any material outside the spaces designed for transport.

Summary of Contents for STORM-S 300cc






















































































Search results

Summary of Contents for STORM-S 300cc

Reviews:

Related manuals for STORM-S 300cc

Brands by name

Popular brands

Wottan motor STORM-S 300cc, User Manual

Search results

Summary of Contents for STORM-S 300cc

Reviews:

Related manuals for STORM-S 300cc

Brands by name

Popular brands