Dental Delivery Unit Operation Manual
REV-A Page 28 of 43
10
Operation Light Switch
To control operation light on or off.
11
Chair Up Button
The chair will be uprising when you
pressing it, stop by releasing.
12
Chair Down Button
The chair will be lowering when you
pressing it, stop by releasing.
13
Backrest Down Button
The backrest will tilt down when you
pressing it, stop by releasing.
14
Backrest Up Button
The backrest will tilt up when you pressing
it, stop by releasing.
15
Position Reset Button
Return to an initialization position.
16
Power Light
The light is on when dental unit is plugged
in.
17
Setting Light
The light is on or twinkle when dental unit is
in the setting state.
18
Heating Light
The light is on or twinkle when dental unit is
in the water heating state.
6.2 Gargling Water Function
The gargling water will be supplying when you pressing the “Gargle water button” (stop
automatically when reaching the pre-set volume).
While pushing the “Heater” button, the indicator flashes and the water heat function is
activated. Stop heating automatically when reaching the pre-set temperature and the indicator
is on. When temperature lowers to certain degrees, begin to heat automatically and the
indicator flashes again. While pushing the heater button again, the water heat function is
stopped and the indicator turns off.
Gargling Water Time Setting
The gargling water supply time could be set between 3 to 60secs. The process as followed:
1) Keep pressing “Gargle water” button for 3secs and into the water supply time setting
program. Release the button when the water is getting the volume as you need. The water
volume has been saved. Then every time you press this button, the water will supply to the
