Worx WX646, Safety And Operating Manual

Page: 10 / 16

Palm sander WX646 WX646.1
triangular base.
2) Replace triangular base by fastening the detail
sanding attachment to base position.
3) Fix it by 5 screws.
4) Similar process is conducted when detail sanding
attachment is changed to triangular base.
7. AttAcH SANDING SHeetS AND PADS
(See fig. e)
This sander features an easy hook and loop accessory
fastening system for quick changing without clamps.
1) Unplug the sander.
2) Carefully center the sanding sheet (A) or pad over
the base (3/4) to be used. Line up the tip of the sanding
sheet (B) or pad with the tip of the base (C).
3) Press the sheet or pad firmly in place.
4) To remove sheet or pad, simply pull it off.
WARNING:
Failure to unplug the sander could
result in accidental starting causing possible
serious personal injury.
8. SANDING WItH eItHeR BASe (See fig. f)
Always hold the sander as shown in Fig F.
Move the sander in long, sweeping strokes across the
sanding surface. Light pressure is needed for sanding,
polishing and scrubbing. Let the sander do the work.
Always check your work. This sander removes material
quickly.
IMPoRtANt:
Applying excessive pressure will slow
the sander and produce unsatisfactory results.
E
F