Worx WX390, Safety And Operating Manual

Page: 11 / 16

11
WX390 WX390.X
Cordless Rotary Hammer
Impact energy 1.2J
Max.
drilling
capacity
Steel
10mm
Wood
13mm
Concrete
13mm
Brickwork
13mm
Machine weight (bare tool) 1.2kg
**X=1-999, A-Z, M1-M9 there are only used for
different customers, there are no safe relevant
changes between these models.
***Voltage measured without workload. Initial
battery voltage reaches maximum of 20 volts.
Nominal voltage is 18 volts.
SUGGESTED BATTERIES AND
CHARGERS
Category Model Capacity
20V Battery
WA3530.1 3.0Ah
WA3550 1.5 Ah
WA3550.1 1.5 Ah
WA3551 2.0 Ah
WA3551.1 2.0 Ah
WA3553 4.0 Ah
WA3556 5.0Ah
WA3561 2.0Ah
WA3572 2.5Ah
20V Charger
WA3760 0.4 A
WA3869 2.0 A
WA3880 2.0 A
We recommend that you purchase your
accessories from the same store that sold you the
tool. Refer to the accessory packaging for further
details. Store personnel can assist you and offer
advice.
NOISE INFORMATION
A weighted sound pressure L
pA
: 84dB(A)
A weighted sound power L
wA
: 95dB(A)
K
pA
&K
wA
3.0dB(A)
Wear ear protection when sound
pressure is over
80dB(A)
VIBRATION INFORMATION
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Hammer drilling
into concrete
Vibration emission value
a
h,HD
= 8.51m/s
2
Uncertainty K= 1.5m/s²
The declared vibration total value may be used for
comparing one tool with another, and may also be
used in a preliminary assessment of exposure.
WARNING:
The vibration emission value
during actual use of the power tool can
differ from the declared value depending on the
ways in which the tool is used dependant on the
following examples and other variations on how
the tool is used:
How the tool is used and the materials being cut
or drilled.
The tool being in good condition and well
maintained.
The use the correct accessory for the tool and
ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any
anti vibration accessories are used.
And the tool is being used as intended by its
design and these instructions.
This tool may cause hand-arm vibration
syndrome if its use is not adequately
managed.
WARNING: To be accurate, an estimation
of exposure level in the actual conditions
of use should also take account of all parts of the
operating cycle such as the times when the tool
is switched off and when it is running idle but
not actually doing the job. This may significantly
reduce the exposure level over the total working
period.
Helping to minimize your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades.
Maintain this tool in accordance with these