background image

Safety first

EN

4

PRODUCT SAFETY 

GENERAL & ADDITIONAL SAFETY INSTRUSCTIONS 

 

          
WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions 
may result in electric shock, fire and/or serious injury. Carefully read the instructions for the safe 
operation of the machine. Save all warnings and instructions for future reference.

 

 

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or 
  lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a 
  person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• This appliance contains batteries that are only replaceable by skilled persons. 

WARNING:

 For the purposes of recharging the battery, only use the detachable supply unit provided with this appliance.

WARNING: 

To reduce the risk of injury to persons and damage to the machine, do not remove battery pack before switching off 

the machine. 
 

IMPORTANT
READ CAREFULLY BEFORE USE - KEEP FOR FUTURE REFERENCE

Safe operation practices
Training

•  Read the instructions carefully. Make sure you understand the instructions and be familiar with the controls and the proper use of the  
  appliance.
• Never allow people unfamiliar with these instructions or children to use the appliance. Local regulations can restrict the age of the  
  operator.
• The operator or user is responsible for accidents or hazards occurring to other people or their property.

Preparation

• Ensure the correct installation of boundary wire as instructed.
• Periodically inspect the area where the appliance is to be used and remove all stones, sticks, wires, bones, and other foreign objects.
• Periodically visually inspect to see that the blades, blade bolts and cutter assembly are not worn or damaged. Replace worn or  
  damaged blades and bolts in sets to preserve balance.
• On multi-spindle appliances, take care as rotating one blade can cause other blades to rotate.

WARNING!

 The lawnmower should not be operated without the guard in place 

OPERATION 
 
1. General

• Never operate the appliance with defective guards, or without safety devices, for example deflectors, in place.
• Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times.
• Never pick up or carry an appliance while the motor is running.
• Operate the disabling device from the appliance.
  -  Before clearing a blockage
  -  Before checking, cleaning or working on the appliance
• It is not permitted to modify the original design of robotic lawnmower. All modifications are made at your own risk. 
• Start robotic lawnmower according to the instructions. When the power key is switched on, make sure you keep your hands and feet 
  away from the rotating blades. Never put your hands and feet under the mower.
• Never lift up robotic lawnmower or carry it when the power key is switched on.
• Do not let persons who do not know how robotic lawnmower works and behaves use the mower.
• Do not put anything on top of robotic lawnmower or its charging station.
• Do not allow robotic lawnmower to be used with a defective blade disc or body. Neither should it be used with defective blades, 
  screws, nuts or cables.
• Always switch off robotic lawnmower when you do not intend to use the mower. Robotic lawnmower can only start when the power 
  key is switched on and the correct PIN code has been entered.

Summary of Contents for WR147E.1








































Reviews: