Getting started
EN
13
You can place the charging station on your lawn or on a hard surface like a walkway, provided that the lawn and the hard surface are at
the same height (no steps).
To enter the station, Landroid needs at least 80cm straight path in front. On the exit side, it needs at least 30cm straight path before a left
turn (fig. 1). If the turn is to the right, there is no need for a straight path (fig. 2).
The charging base should never be positioned on a slope (fig. 3). Make sure it is level and resting on a flat surface (fig. 4).
Charging station checklist:
within reach of AC mains
in shade
straight path on entrance; straight path on exit if necessary
flat land
no irrigation sprinklers nearby
Plan for the boundary wire
The wire has to be placed at a certain distance from the edge of the lawn. This distance changes depending on what’s on the other side
of the edge. Different parts of your lawn may border different scenarios:
1. If the edge of the lawn borders a step: keep the wire 26cm from the edge.
2. If the edge of the lawn borders a path at the same height: keep the wire 10cm from the edge.
3. If the edge of the lawn borders gravel: keep the wire 26cm from the edge, as Landroid’s wheels may slip on gravel.
If a side of your lawn borders a neighbor’s lawn with a robotic mower in use, lay your wire 1m apart from your neighbor’s wire to avoid
possible interference.
80cm
30cm
1
80cm
2
26cm
10cm
26cm
3
4
0°
0°
