WR 2200 /1
–
WR 2200 /2
MANUAL DE USUARIO
VERSION 1.0
WR 2200
www.workpro.es
7
Receiver (SETTING)
IR synchronism
Hold the transmitter (handheld microphone or bodypack) with the IR port pointed toward the
receiver’s IR
port in a distance between 5-20 cm.
Press “SET” button on the receiver one time. The LCD
displays
IA
on the LCD, wait 4 or 5 seconds, the
transmitter will synchronize to the same frequency marked in the receiver.
NOTE: When using multiple systems, synchronization must be done one at a time.
Auto channel select
Press SET two times. The dot 1 will blink. The LCD shows
SCAN
. Press
UP or DOWN button. The receiver will try to find any free frequency.
Manual frequency set
Press SET three times. The dot 1 and frequency value will blink. Press UP
or DOWN to manually change the frequency.
Sensitivity
Press SET four times. The dot 1 and sensitivity value (2) will blink. Press
the UP or DOWN button to change the SQ level from (-68) to (-95).
Lock set
Press and hold DOWN button and press SET, the lock set will be activated showing a
“key” symbol in the display. It cannot do any operation except power on/off.
