background image

4

Cordless Li-Ion handy saw                      

WG894E WG894E.5 

WG894E.9

treated lumber.

Your risk from these exposures varies, 
depending upon how often you do this type 
of work. To reduce your exposure to these 
chemicals.
•  Work in a well-ventilated area.
•  Work with approved safety equipment, 

such as those dust masks that are specially 
designed to filter microscopic particles.

SAFETY WARNINGS FOR 

BATTERY PACK

a) Do not dismantle, open or shred cells 

or battery pack. 

b) Do not short-circuit a battery pack. Do 

not store battery packs haphazardly 

in a box or drawer where they may 

short-circuit each other or be short-

circuited by conductive materials. 

When battery pack is not in use, keep it 
away from other metal objects, like paper 
clips, coins, keys, nails, screws or other 
small metal objects, that can make a 
connection from one terminal to another. 
Shorting the battery terminals together 
may cause burns or a fire.

c) Do not expose battery pack to heat or 

fire. Avoid storage in direct sunlight.

d) Do not subject battery pack to 

mechanical shock.

e) In the event of battery leaking, do not 

allow the liquid to come into contact 

with the skin or eyes. If contact has 

been made, wash the affected area 

with copious amounts of water and 

seek medical advice.

f)  Seek medical advice immediately 

if a cell or battery pack has been 

swallowed.

g) Keep battery pack clean and dry.

h) Wipe the battery pack terminals with 

a clean dry cloth if they become dirty.

i)  Battery pack needs to be charged 

before use. Always refer to this 

instruction and use the correct 

charging procedure.

j)  Do not maintain battery pack on 

charge when not in use.

k) After extended periods of storage, 

it may be necessary to charge 

and discharge the battery pack 

several times to obtain maximum 

performance.

l)  Battery pack gives its best 

performance when it is operated at 

normal room temperature 

  (20°C ± 5°C).

m) When disposing of battery packs, 

keep battery packs of different 

electrochemical systems separate 

from each other.

n) Recharge only with the charger 

specified by WORX. Do not use any 

charger other than that specifically 

provided for use with the equipment. 

A charger that is suitable for one type of 
battery pack may create a risk of fire when 
used with another battery pack.

 

o) Do not use any battery pack which 

is not designed for use with the 

equipment.

p) Keep battery pack out of the reach of 

children.

q) Retain the original product literature 

for future reference.

r)  Remove the battery from the 

equipment when not in use.

s) Dispose of properly.

Summary of Contents for WG894E













Reviews: