15
WG743E WG743E.X Cordless Lawn mower
VIBRATION INFORMATION
Typical weighted vibration
a
h
＜
2.5 m/s2
Uncertainty
K = 1.5 m/s2
WARNING:
The vibration emission value during
actual use of the power tool can differ from the
declared value depending on the ways in which the tool
is used dependant on the following examples and other
variations on how the tool is used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well maintained.
Using the correct accessory for the tool and ensuring it
is sharp and in good condition.
The tightness of the grip on the handles and if any anti
vibration accessories are used.
And the tool is being used as intended by its design and
these instructions.
This tool may cause hand-arm vibration syndrome
if its use is not adequately managed.
WARNING:
To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the operating
cycle such as the times when the tool is switched off and
when it is running idle but not actually doing the job. This
may significantly reduce the exposure level over the total
working period.
Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades.
Maintain this tool in accordance with these instructions
and keep well lubricated (where appropriate).
If the tool is to be used regularly then invest in anti
vibration accessories.
Plan your work schedule to spread any high vibration tool
use across a number of days.
OPERATION INSTRUCTION
NOTE:
: To reduce the risk of injury, user must
read instruction manual.
Intended Use
This product is intended for domestic lawn mowing.
ASSEMBLY AND OPERATION
ACTION
FIGURE
ASSEMBLY
Assembling the handle bar
NOTE:
Choose one of the two holes in
the lower handle for desired handle’s
height.
See Fig. A1, A2,
A3, A4, A5
Assembling grass collection bag
See Fig. B1, B2,
B3, B4
Fitting grass collection bag to the
lawn mower
NOTE:
Depress the grass collection
bag slightly to ensure that it is
completely installed.
NOTE:
Take the mulching insert out
of the lawn mower before fitting the
grass collection bag.
See Fig. C1,
C2, C3
Checking the battery charge condition
NOTE:
Fig. D1 only applies for the
battery pack with battery indicator
light.
See Fig. D1
Charging the battery pack
NOTE:
The batteries are shipped
uncharged. Each battery must be fully
charged before the first mow.
Always fully charge the two batteries at
same time. More details can be found in
charger’s manual.
See Fig. D2
Fitting/removing battery
NOTE:
• This machine will only run when
2 batteries are installed. It is
recommended to use the same
two batteries and charge the two
batteries at the same time.
• Using two different sized
batteries or if one battery isn’t
fully charged then the machine
will only run to the lowest common
denominator.
See Fig. E
OPERATION
Battery power indicator on the machine
See details in BATTERY STATUS part
IMPORTANT
When only one light is illuminated,
at least one battery is depleted and
needs to be charged, even though the
mower may still be capable of cutting
grass. Continuing to operate your
lawnmower with the battery in this
discharged condition may reduce the
life and performance of your battery.
When no light is illuminated, at least
one battery is not fully installed or
battery may be defective, please
double check the batteries are fully
seated into position.
See Fig. F
Summary of Contents for WG743E
