Worx WG708E, Original Instructions Manual

Page: 11 / 184

11
Electric lawn mower EN
unclogging chute;
- Before checking, cleaning or
working on the lawnmower;
- After striking a foreign
object. Inspect the
lawnmower for damage
and make repairs before
restarting and operating the
lawnmower.
If the lawnmower starts to
vibrate abnormally (check
immediately)
- Inspect for damage;
- Replace or repair any
damaged parts;
- Check for and tighten any
loose parts.
MAINTENANCE AND
STORAGE
a) Keep all nuts, bolts and
screws tight to be sure the
machine is in safe working
condition;
b) Check the grass catcher
frequently for wear or
deterioration;
c) Replace worn or damaged
parts for safety. Use only
genuine replacement parts
and accessories.
d) Be careful during adjustment
of the machine to prevent
entrapment of the fingers
between moving blades and
fixed parts of the machine.
e) On machines with multi
blade, take care as rotating
one blade can cause other
blades to rotate.
f) Always allow the machine to
cool down before storing.
g) When servicing the blades
be aware that, even though
the power source is switched
off, the blades can still be
moved.
RECOMMENDATIONS
To connect the machine only
to a supply circuit protected by
a residual current device
(RCD ) with a tripping current
of not more than 30mA.