Worx WG502E, Safety And Operating Manual

Page: 9 / 12

9
All-in-One blower/
vac/mulcher
All-in-One blower/
vac/mulcher
WG502E
OPERATION
INTENDED USE:
The blower & Vac is intended for residential use only.
Use the blower outdoors to move or vacuum yard
debris as needed.
ASSEMBLY AND OPERATION
ACTION FIGURE
Blow mode
Assembling the Blower/
Vacumm Tube
WARNING:
Make sure the
ON/OFF switch is in the
OFF Position before tightening
the safety lock knob.
WARNING:
Do not loosen
the safety lock knob
rapidly. Turn the knob with
normal speed. Take the turning
time not less than 15s to ensure
the moving parts completely
stop before taking apart the
vacuum tube.
See Fig. A &
B1&B2
Attaching the Extension Cord See Fig. C1 & C2
Starting & Stopping See Fig. D
Using the Blower See Fig. E1 & E2
Adjusting the Blowing Speed See Fig. F
Vacuuming
Attaching the Leaf Collection
Bag
See Fig. G 1&
G2& G3
Attaching the Extension Cord See Fig. C1 & C2
Starting & Stopping See Fig. D
Using the Vacuum See Fig. H1 &H2
Emptying the Leaf Collection
Bag
See Fig. I1&
I2& I3
Removing Clogged Debris from
the Impeller(no tool included)
WARNING:
Make sure the
ON/OFF switch is in the
OFF Position before loosening
the safety lock knob.
See Fig. J1&J2
STORAGE
Store the Blower/Vacuum and extension cord
indoors, in a cool dry location, out of reach of
children and animals.
TROUBLE SHOOTING
Problems Possible Causes Corrective
Action
The
Blower/Vac
does not
operate.
The Blower/
Vacuum Tube is
not attached to the
Motor Housing.
Attach the
Blower/ Vacuum
Tube to the
Motor Housing.
Power cord is not
connected to the
power source.
Connect the
power cord to a
power source.
The
Blower/Vac
jammed or
clogged.
Debris blocking in
the Impeller
Remove clogged
debris from the
Impeller.
Debris blocking
in the Blower/
Vacuum Tube or
the connection of
the Leaf Collection
Bag.
Remove clogged
debris from
the Blower /
Vacuum Tube or
the connection
of the Leaf
Collection Bag.