background image

EN

Quick reference

Troubleshooting

Make sure your Find My Landroid

®

 module is securely installed and follow the actions below if your Landroid

®

 does not 

operate correctly. If these do not identify and correct the problem, contact your service agent.

Symptom

Cause

Action

The position of Landroid

®

 

cannot be shown precisely on 
the App, or its position cannot 
be detected

.

The GPS signal is affected by the 
weather or some interference. 

1. Check and make sure: Landroid

®

 is not upside 

down or on its side; Landroid

®

 is not covered by 

some metal objects.
2. Take Landroid

®

 to an open area where it can 

obtain a mobile signal. 

You are not using the latest version 
of the  Landroid

®

 App. 

Please update the Landroid

®

 App to the latest 

version.

Landroid

®

 does not give an 

alarm when it is outside the 
Geo fence.

 

The software of Landroid

®

 itself is 

not the latest.

Update the software of the Landroid

®

 before 

using the module.

There is a small tolerance area 
immediately outside the perimeter 
set for Find My Landroid

®

Bring Landroid

®

 outside of the tolerance area 

(approximately 30m from the Geo fence) to verify 
that Find My Landroid

®

 is working.

The Find My Landroid

®

 module is 

powered off.

Turn on Landroid

®

 and if necessary recharge 

it. If it doesn't need to be recharged, Find My 
Landroid

®

 module will be recharged by the 

Landroid

®

 PowerShare battery. 

(Landroid

®

 has an inner battery that lasts a week 

after it is turn off).

Geo Fence is not set, or radius of 
Geo Fence is not set.

Use the Landroid

®

 App to set it properly.

Landroid

®

 is powered off.

In this case, the alarm will be sent 10mins after 
the Landroid

®

 is brought outside of the Geo 

fence.

Landroid

®

 still works when it 

is outside the Geo fence.

Geo Fence is not set, or radius of 
Geo Fence is not set.

Use the Landroid

®

App to set it properly.

Geo Fence is not enabled.

Landroid

®

 works normally but 

the communication between  
Landroid

®

 and smartphone 

does not work properly

.

The cellular network coverage of Find 
My  Landroid

®

 is weak.

Check if you Find My Landroid

®

 has a weak signal. 

If yes move to an area with a good signal.

The Find My Landroid module is 
damaged.

Please go to https://account.worxlandroid.com/ 
access your profile and open a ticket using the form

The software of Landroid

®

 is not the 

latest.

Update the software of Landroid

®

.

The Landroid

®

 App needs to be 

updated.

Update your Landroid

®

App before using the 

module.

The SIM of the Find My Landroid

®

 

module is not activated.

Before first use, make sure you have activated the 
SIM by following the procedure in the Landroid

®

 

App.

The Find My Landroid

®

 module is 

not well connected to Landroid

®

.

Reinstall the Find My Landroid

®

 module. Check that 

the module connector is correctly inserted with a 
click.

Landroid

®

 has no power.

Check if the screen of Landroid

®

 is illuminated. If 

not, send Landroid

®

 back to the charging base for 

charging or start emergency procedure to charge 
it.

The pre-paid SIM subscription has 
expired.

The SIM has a pre-paid 3-year subscription. Once 
expired it must be renewed. 
An e-mail with all details on renewal will be sent 
once the expiration is near. When you'll receive it, 
follow the instruction.

8

Summary of Contents for WA0862











Reviews: