13
WX540
WX540.3 WX540.9
12V Li-Ion
multi-purposed saw
OPERATION
WARNING:
Always wear eye protection while
operating this or any other power tool.
WARNING: Burn hazard.
Do not touch the
blade immediately after use. Contact with the
blade may result in personal injury.
Before you begin work, ensure the material to be cut is
rigid. Small workpieces should be securely clamped to
a work table.
1. SWItcHING oN AND off (See fig. I)
For starting operation of the machine, press the lock-off
button (2) first, then press and hold the On/Off switch
(1) afterwards. To switch off the machine, release the
On/Off switch (1).
for safety reasons the on/off switch of the
machine cannot be locked; it must remain
pressed during the entire operation.
2. HAND GRIP AReAS
Always ensure you maintain a firm grip while operating
your jigsaw.
3. PRotectIoN fINGeR
The finger is located in front of the blade holder. While
working, it will help prevent accidental contact with the
moving blade.
4. leD WoRk lIGHt
A light (8) is built-in near the end of the protection
finger. The light will automatically come on each time
the on/off switch is depressed.
5. cUttING
WARNING:
Always wear eye protection while
operating this power tool.
WARNING:
• Never hold the pivot head when operating the tool.
• Never hold the motor cover when operating the tool.
Before cutting any type of material, be sure it is
firmly anchored or clamped to prevent slipping.
Holding the work by hand or against your body
leaves it unstable and may lead to loss of control.
• Place blade lightly against work to be cut, depress
the trigger switch and allow it to obtain maximum
speed before applying pressure.
• Whenever possible, the saw foot plate must be
held firmly against the material being cut. This will
prevent the saw from jumping or vibrating and
0-90
O
8
2
1
15
14
13
15
Position VI
Position I
a
B
C
E3
A2
E1
G1
E2
G2
H
I
A1
D
F
