11
WX540
WX540.3 WX540.9
12V Li-Ion
multi-purposed saw
4. to ReMove oR INStAll BAtteRy PAck
(See fig. B)
Locate the battery release buttons (11) on side of battery
pack and depress both sides to release the battery pack
from your tool. Remove the battery pack from your tool.
After it has recharged insert the battery pack into the
battery port. A simple push and slight pressure will be
sufficient.
ADJUSTmENT
Function of this tool is the combination of a jigsaw and
a reciprocating saw, which is realized by operating the
pivot release lever (4).
Lift up the pivot release lever to full until it cannot be
lifted. (See Fig. C)
Rotate the front portion of the tool into any of the SIX
positions (0, 18, 36, 54, 72 and 90deg) (See Fig. D).
Restore the pivot release lever.
In Position I, this tool can be worked as a jigsaw.
In Position VI, this tool can be worked as a reciprocating saw.
WARNING!
When adjusting the tool, you can only hold the
foot plate (9) as shown in Fig.E1. Never hold the pivot
head as shown in Fig. E2, E3.
WARNING!
• To avoid being pinched, keep hands away from the
hinge when changing positions.
• To avoid tool being turned on accidentally, make
sure keep your hands away from the lock-off button.
RePlAcING/INSeRtING tHe SAW BlADe
Before any work on the machine itself, remove
the battery.
The blade (15) should extend past the foot plate and
the thickness of the workpiece during the cut. Select the
blade best suitable for the material to be cut and use the
shortest blade suited for the thickness of the material.
WARNING! cut hazard.
Blade breakage may
occur if the blade does not extend past the foot
plate and the workpiece during the cut. Increased risk
of personal injury, as well as damage to the foot plate
and workpiece may result.
cAUtIoN:
Keep your hands away from the lock-off
button to prevent switch actuation before making any
adjustments or removing or installing attachments or
accessories.
0-90
O
8
2
1
15
14
13
15
Position VI
Position I
a
B
C
E3
A2
E1
G1
E2
G2
H
I
A1
D
F
