8
Oscillating tool WX676 WX676.5 WX676.7
OPERATION INSTRUcTIONS
Note:
Before using the tool, read the instruction
book carefully.
INteNDeD USe
The power tool is intended for sawing and remodelling
wooden materials, plastic, plaster, non-ferrous metals
and fasteners (e.g. nails and clamps) as well as for
working on soft wall tiles and for dry grinding of small
surfaces. It is especially suitable for working close to
edges and for flush cutting.
1. MoUNtING AcceSSoRIeS
cAUtIoN:
For all work or when changing
accessories, always wear protective gloves.
Avoid danger of injury from the sharp edges of the
accessories. Accessories can become very hot while
working, presenting danger of burns!
Make sure the
tool is unplugged prior to changing accessories.
WARNING: to reduce the risk of injury, do
not let the sharp side of the accessory face
back toward the user’s hand.
-loosen the flange
Use the Allen Key to rotate the Flange clockwise. (See
Fig. A)
- Insert Accessories
Insert the Accessory onto the
Universal fit
tM
Accessory Interface.(See Fig. B)
-tighten the flange
- Use the Allen Key to rotate the Flange counterclockwise
until accessory is tightened securely.(See Fig. C)
Note:
For prior model WORx Sonicrafter
®
hex-interface
accessories and most other non-WORx branded
accessories, the Flange must be completely removed to
install accessory (See Fig. D).
A
D
C
B
E
H
G
F
I
K
J
