background image

Quick reference

EN

34

Landroid runs outside the boundary 
wire. 

Landroid does not mow an area within a 
boundary wire zone. 

Landroid reverses or rotates erratically 
near the boundary wire.

The boundary wire of another Landroid 
or robotic mower is positioned too 
closely.

Ensure at least 1m clearance is provided 
in between your boundary wire and that 
of your neighbor.

In wet conditions, the boundary wire 
electric signal may leak where the wire 
has been joined or repaired incorrectly.

Check boundary wire joints. Insulate to 
provide a fully waterproof connection.

There is boundary wire electric signal 
leakage due to broken insulation.

Repair damaged boundary wire 
with the wire connectors supplied.

Landroid

 

slips out of its working area 

going down a hill.

Low grip of Landroid drive wheels.

Please check the wheels are clean and 
free of mud in order to have the 
maximum grip possible.

Landroid operative system crashes 
when charging or on standby.

Software or display fault.

Restart Landroid.

Landroid shuts off when docking in the 
charging base.

Landroid fails to charge due to over 
temperature protection and is powered 
off.

Place the charging base in a shady area 
or wait until the temperature has cooled 
down.

Poor connection.

Check the LED light on the charging 
base.

Check the connection between the 
contact pins located on the charging 
base and the charging strip.

Landroid stops in the working area.

There is an obstacle in the working area. Remove the obstacle from Landroid’s 

working area.

The cutting height is set too low for the 
length of the grass or the grass is too 
dense.

Raise the cutting height and then 
gradually lower.

The extended boundary wire should not 
exceed 350m or it may cause signal 
problem.

Reduce the lenght of the boundary wire.

The distance between the center of 
the lawn and the boundary wire should 
not exceed 25m or it may cause signal 
attenuation.

Reduce the distance between the 
center of the lawn and the boundary 
wire perimeter within 25m.

Landroid flips over.

There is an inclined obstacle on the 
lawn.

Exclude the obstacle from Landroid’s 
working area.

Summary of Contents for Landroid WR139E





































Reviews: