Worx CHOPPER WX801.X, Original Instructions Manual

Page: 19 / 252

19
outer flange is tight; check that the wheel is correctly
located on the flange plate.
2. If there is any evidence that the wheel is damaged
do not use as the damaged wheel may disintegrate,
remove it and replace with a new wheel. Dispose of old
wheels sensibly.
3. If working on aluminum or a similar soft alloy, the
wheel will soon become clogged and will not grind
effectively.
4. When overloaded, the motor comes to a stop. Relieve
the load on the machine immediately and allow cooling
for approx. 30 seconds at the highest no-load speed.
5. When using as intended for the power tool cannot be
subject to overload. When the load is too high or the
allowable battery temperature of 75 °C is exceeded,
the electronic control switches off the power tool until
the temperature is in the optimum temperature range
again.
6. If machine is blocked, please turn it off and turn it on
again after 1~2 seconds.
ENVIRONMENTAL PROTECTION
Waste electrical products should not be disposed of
with household waste. Please recycle where facilities
exist. Check with your Local Authority or retailer for
recycling advice.
DECLARATION OF CONFORMITY
We,
Positec Germany GmbH
Grüner Weg 10, 50825 Cologne, Germany
Declare that the product,
Description Worx Angle Grinder
Type WX801 WX801.X (80-designation of
machinery, representative of Angle grinder )
Function peripheral and lateral grinding and
cutting
Complies with the following directives,
2006/42/EC, 2011/65/EU&(EU)2015/863, 2014/30/EU
Standards conform to:
EN 55014-1, EN 55014-2, EN 60745-1, EN 60745-2-3
The person authorized to compile the technical file,
Name Marcel Filz
Address Positec Germany GmbH, Grüner Weg 10,
50825 Cologne, Germany
2021/05/04
Allen Ding
Deputy Chief Engineer,Testing & Certification
Positec Technology (China) Co., Ltd
18, Dongwang Road, Suzhou Industrial
Park, Jiangsu 215123, P. R. China