11
WX840 WX840.X
20V Cordless 18 gauge Nail/
Staple Gun
WARNING:
The vibration emission value during
actual use of the power tool can differ from the
declared value depending on the ways in which the tool
is used dependant on the following examples and other
variations on how the tool is used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensuring
it is sharp and in good condition.
The tightness of the grip on the handles and if any anti
vibration accessories are used.
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration syndrome if
MXWYWIMWRSXEHIUYEXIP]QEREKIH
WARNING:
To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the operating
cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the
NSF8LMWQE]WMKRMƼGERXP]VIHYGIXLII\TSWYVIPIZIP
over the total working period.
Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades
Maintain this tool in accordance with these instructions
and keep well lubricated (where appropriate)
If the tool is to be used regularly then invest in anti
vibration accessories.
Plan your work schedule to spread any high vibration
tool use across a number of days.
OPERATING INSTRUCTIONS
NOTE:
Before using the tool, read the
instruction book carefully.
INTENDED USE
This tool is intended for nailing decoration of board
line, skirting line and wooden frame, etc.
WARNING: Do not point the nail gun to people
or animals. Always remove the nails and the
battery pack when not using the tool.
ASSEMBLY AND OPERATION
ACTION
FIGURE
BEFORE OPERATION
Removing the battery pack
See Fig. A1
Charging the battery pack
See Fig. A2
Installing the battery pack
See Fig. A3
ASSEMBLY
Installing the belt hook
NOTE:
The belt hook can be
installed on the left or right side
of the nail gun.
See Fig. B
0SEHMRKXLIFVEHREMPWGVS[R
staples
NOTE:
Keep pressing the
magazine release button
when opening or closing the
magazine.
WARNING:
Keep the tool
pointed away from
yourself and others when
loading nails. Failure to do so
could result in possible serious
personal injury.
See Fig. C1,
C2, C3
OPERATION
Selecting the nailing mode
Single sequential actuation
mode:
Contact actuation mode:
WARNING:
The nail gun
will not function properly
if the selector is not securely
seated in either position. Always
assure the selector is seated
properly to avoid an unexpected
nail discharge and possible
serious personal injury.
See Fig. D
9WMRKXLISRSJJW[MXGLMRX[S
different modes
/IITTVIWWMRKXLISRSJJW[MXGL
when moving the tool in the
contact actuation mode as
shown in Fig. E2.
NOTE:
The nail gun will be
functioned only when pressing
the switch and pushing the
workpiece contact against the
work surface at the same time.
WARNING:
Never wedge
or hold back the
workpiece contact mechanism
during operation of the tool.
Doing so could result in possible
serious injury.
See Fig. E1, E2
Drive depth adjustment
NOTE:
Drive a test nail after
each adjustment until the
desired depth is set.
See Fig. F
