12
WX031 WX031.X
20V Cordless Wet/Dry
Vacuum Cleaner
Function as a blower
Insert the hose into the blower outlet
(Position 2).
See Fig. E
Checking the battery charge condition
NOTE:
Fig. F1 only applies for the bat-
tery pack with battery indicator light.
See Fig. F1
Charging the battery pack
See Fig. F2
Installing the battery pack
See Fig. F3
OPERATION
Turning on the machine
Press the on-off switch to start operation.
Power Selection
When the switch is pressed for the first
time, the machine starts and works at
high speed. Press the ECO button for a
low speed. Press it again, the cleaner will
switch to high speed. To stop, press the
ON/OFF switch again.
NOTE:
When working under high speed,
the light is not on. When working under
ECO mode, the light shows green.
WARNING:
Please keep the air
intake unobstructed, otherwise it
may cause motor overheating and may
damage the machine.
See Fig.
G1, G2
Using as a vacuum cleaner
Dry Vacuuming
Vacuum items only small enough to
fit through the hose. When vacuuming,
make sure that the filter stays in place.
The performance of the vacuum will
decrease with a full collection container.
When emptying the collection container,
check to see if the filter needs cleaning.
Attention:
1. Do not suck sharp objects such as nails
into the vacuum.
2. Do not suck objects with high
temperature such as carbon ash. Please
let it cool down first.
3. Clean the HEPA filter regularly.
Wet Vacuuming
This machine is equipped with double-
probe detector, which is designed to
shut off the suction when the collection
container reaches full wet capacity. When
the collection container is full, empty
the collection container as shown in
Maintenance.
Attention:
1. Put the machine on the flat ground.
2. Make sure the filter is completely dry
after picking up water or wet debris.
See Fig.
H1, H2
Using as a blower
Open the rubber cover on position 2
to start using the air blowing function
and put it back to its original place after
completion.
WARNING:
Never point the nozzle
at anyone in the vicinity.
See Fig. I
6. MAINTENANCE
Remove the battery before carrying out any
servicing or maintenance.
Emptying the collection container (See Fig. J1, J2,
J3)
Dry Waste:
Remove the battery pack. Unhook the two locking
latches and remove the lid. Inspect the filter, lightly shake
any dust or dirt from it, or replace if necessary. Empty
the collection container, or wash out if necessary. Before
replacing the lid, make sure all pieces are completely dry.
Reinstall lid and lock securely.
Liquid Waste:
Remove the battery pack. Unhook the two locking
latches and remove the lid. Empty the collection
Summary of Contents for BRUSHLESS MOTOR WX031
