Worx Nitro BRUSHLESS MOTOR WX031, Safety And Operating Manual Original Instructions

Page: 11 / 16

11
WX031 WX031.X
20V Cordless Wet/Dry
Vacuum Cleaner
2. COMPONENT LIST
1. HOSE WITH TAPERED NOZZLE
2. BLOWER OUTLET
3. SUCTION INLET
4. HANDLE
5. BATTERY COVER
6. LID
7. HOSE HOOK
8. TANK LATCH
9. COLLECTION CONTAINER
10. ON/OFF SWITCH
11. ECO BUTTON
12. WIDE NOZZLE
13. CREVICE NOZZLE
14. SHOULDER STRAP
Some of the accessories mentioned in
illustrations or texts are not included in the
scope of supply.
3. TECHNICAL DATA
WX031 WX031.X *
Rated Voltage 20V Max.**
Suction 16 Kpa
Air Flow 1.1 m 3 /min
Dustbin Capacity 8 L
Water Capacity 3 L
Run Time (4.0Ah ) 40 mins
Machine Weight
(bare tool)
3 kg
* X=1-999, A-Z, M1-M9 there are only used for different
customers, there are no safe relevant changes
between these models.
** Voltage measured without workload. Initial battery
voltage reaches maximum of 20 volts. Nominal voltage
is 18 volts.
Category Type Capacity
20V Battery
WA3551 2.0Ah
WA3014 4.0Ah
20V Charger WA3880 2.0A
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to
the accessory packaging for further details. Store
personnel can assist you and offer advice.
4. INTENDED USE
This machine can be used as both vacuum cleaner and
blower. With the strong suction power, it can easily
pick up wet and dry messes.
5. OPERATING INSTRUCTIONS
NOTE: Please read the instructions carefully
before use.
ASSEMBLY AND OPERATION
ACTION FIGURE
BEFORE OPERATION
Take out all accessories
Unhook the tank latches on each side
to open the lid and take out all the
accessories. See Fig.
A1
,
A2
Hose hook assembly
Install the hose hook onto the lid, facing
it upward. See Fig. B
Assembling the shoulder strap See Fig. C
Function selection
This machine has the suction inlet
(Position 1) and blower outlet (Position
2) separately. Connect the hose to the
proper port depending on your work.
Function as a vacuum
Insert the hose into the suction inlet
(Position 1).
Nozzle assembly
When using as a vacuum, you can
choose wide nozzle and crevice nozzle
depending on different working needs.
See Fig.
D1, D2