Worldwel Longrun 500LMP, Operation Manual

Page: 6 / 9

1 Volume Adjust various data setting
2 Data Select Button F2 Adjustable Date : Arc Length, Welding voltage, Working condition
3 Data Select Button F1 Adjustable Date : Motor speed, Welding current, Arc power, Arc concentration
4 Program button Use saved data
5 Save button Use to enter setup menu or save data.
6 Wire diameter select Use to select wire diameter
7 Wire material select Use to select Wire material and shield gas
8 Function select
Use to select function
1. Crater off
2. Hold
3. Crater(Start current / Crater current control)
4. Arc spot
9 Welding method select
Use to select welding method
1. Double Pulse MIG
2. MIG
3. STICK
4. TIG
5. Gouging
10 F2 Button LED
11 JOB LED It shows that load data from saved job
12 Welding speed LED It shows the welding speed (cm/min)
13 Welding voltage LED It shows welding voltage
14 Arc length difference LED
It shows Arc length differences
- short arc length
0 standard
+ long arc length
15
Machine internal temperature
LED
16
Arc Power / Arc
Concentration
It shows that arc power adjustment during MIG / MAG pulse welding
- arc power decrease
0 standard
+ arc power increase
In MIG / MAG welding, arc concentration is set during short-circuit control
- strong arc and stable
0 standard
+ smooth arc and low spatter
17 Motor speed LED It shows the motor speed (M/min)
18 Welding current LED It shows the welding current
19 Base metal thickness LED It shows the Base metal thickness
20 Welding angle LED It shows the Welding angle (“a”)
21 F1 Selection LED It shows the F1 is selected
22 Program LED It shows the program is selected
23 Hidden data Menu LED Lights when hidden data is modified
■
Adjust hidden data
․
Simultaneously press and release the Save button (5) and the wire selection button (6).
The, the Hidden Data menu LED (23) lights up and you can modify the hidden data.
․ When the user presses the save button 5 after the modification is finished, the data is stored and
the hidden data menu LED 23 is also turned off while exiting from the hidden data adjustment
menu.
․
After selecting the value to be corrected with the wire selection button (6), you can modify the