Worldlawn DIAMONDBACK, Operator'S Manual, Page: 42 / 56

42
8. Shut off unit. Remove jumper wire from
wire harness and plug connector into seat
switch.
9. Remove the jack stands
10. Raise the deck and re-install the height of
cut pin.
11. Check that the machine does not creep in
neutral with the park brakes disengaged.
NEUTRAL ADJUSTMENT
If the hydro RTN requires adjustment, please
refer to the appropriate Hydro Gear service
manual for adjustment procedure.
MOTION
CONTROL DAMPER ADJUSTMENT
Two positions are provided for installing the
forward damper stud to the motion control
assembly. The upper hole provides less
resistance, the lower provides more
.
MOTION CONTROL NEUTRAL LOCK
PIVOT ADJUSTMENT
The flanged nut can be adjusted to obtain a
more desired motion control lever resistance
Tighten or loosen the lower flanged nut to the
desired feel.
For more resistance, tighten the flanged nut.
For less resistance, loosen the flanged nut.
MOTION CONTROL HANDLE
ADJUSTMENT
Adjusting the height:
The motion control levers can be adjusted
higher or lower for maximum operator comfort.
1. Remove the two bolts holding the control
lever to the control arm shaft (A)
2. Move the control lever to the next set of
holes (B). Secure the lever with the two
bolts.
3. Repeat the adjustment for the opposite
control lever.