HANGZHOU BLUE WHALE MUSIC TECHNOLOGY CO.,LTD HANGZHOU WORLDE MUSIC ELECTRONIC CO., LTD
WEBSITE: WWW.WORLDE.COM.CN EMAIL:[email protected] TEL:86 571 88730848
- 11 -
5.7.6 MIDI channel
Press the MENU button repeatedly until the OLED dispays “MIDI channel” to start the function of Channel selection. Channel selection is for
adjusting the Current MIDI channel. When this function is valid, the OLED displays the “MIDI channel” and the current channel number. It
can be adjusted by value dial and confirmed by Enter button. The initial value is 1, adjusting scale is 1
～
16. The operation steps is shown as
below and the OLED displays the following:
(1) Press the MENU button repeatedly until the OLED dispays “MIDI channel”.
(2) Rotate the value dial to adjust the keyboard MIDI Channel, the OLED will display the current MIDI channel.
(3) Press the “Enter” button to confirm and the OLED will display “Done”. Holding the “Enter” button for 2 seconds to exit the edit mode and
return to parameter display mode.Then if you rotate the knobs, move the sliders or trigger the pads the OLED will display the current
parameters of these controllers.
5.7.7 Select the Backlit RGB Color of 8 Pads
Press the MENU button repeatedly until the OLED dispays “Pad color R/G/B” to start the function of selecting the Backlit RGB Color of 8
Pads. When this function is valid, the OLED displays the “Pad color R/G/B” and the current RGB color number. R is for red, G is for green
and B is for blue. It can be adjusted by value dial and confirmed by Enter button. The initial value is 127, adjusting scale is 0
～
255. For
example, you may want to set the Pad1 with RED color for the RGB backlight. This is done by setting the Pad color R to 127, Pad color G to
0 and Pad color B to 0 to the Pad1. The operation steps is shown as below and the OLED displays the following:
(1) Trigger the Pad1.
(2) Press the MENU button repeatedly until the OLED dispays “Pad color R”.
(3) Rotate the value dial until the OLED displays 127.
(4) Press the “Enter” button to confirm and the OLED will display “Done”.
(5) Press the MENU button repeatedly until the OLED dispays “Pad color G”.
(6) Rotate the value dial until the OLED displays 0.
(7) Press the “Enter” button to confirm and the OLED will display “Done”.
(8) Press the MENU button repeatedly until the OLED dispays “Pad color B”.
(9) Rotate the value dial until the OLED displays 0.
(10) Press the “Enter” button to confirm and the OLED will display “Done”. Holding the “Enter” button for 2 seconds to exit the edit mode and
return to parameter display mode.Then if you rotate the knobs, move the sliders or trigger the pads the OLED will display the current
parameters of these controllers.
