REAR PANEL OVERVIEW
1. DC POWER ADAPTER INPUT
–
Plug in a 9V
–
1A DC power adapter if you do not wish
to power the PANDA200 through the USB connection.
2. USB CONNECTION
–
Plug a standard USB cable into this outlet and into the USB port
of your computer. The computer
’
s USB port will provide power to the PANDA200. This
connection is used to send and receive MIDI data to and from your computer and may
also be used to send MIDI data from your computer to a device attached to the MIDI OUT
port of the PANDA200.
3. MIDI OUT
–
Use a five-pin MIDI cable to connect the MIDI OUT of the PANDA200 to
the MIDI IN of an external device.
4. MIDI IN
–
Use a five-pin MIDI cable to connect the MIDI OUT of an external MIDI device
to the MIDI IN of the PANDA200.
5. Pedal A
–
can be used as MIDI CC switches.
6. Pedal B
–
can be used as MIDI CC continues
.
