
3.4.1 SHIFT
Using SHIFT KEY to select the upper function of the key. The LCD displays the following:
3.4.2 ENTER
Press ENTER to confirm the data
3.4 Control functions
on your software in a way that would not be possible on a standard dial or slider. The pressure pads can be used to make some
very interesting effects.
As we’ve seen above, each pad can be assigned an individual MIDI controller number.
As you apply more and more pressure to the pad, the value of the controller you are sending will
increase, until the maximum value is reached. On release, the pad will return to the minimum value.
independently.
3.6 MMC(MIDI MACHINE CONTROL
)
There are 6 buttons used for MMC-[|<<],[<<],[>>],[O],
[
stop
],[
play
].
It is common to set the 6
buttons as Sequencer remote control buttons, it needs to be working with sequencer
software.
3.5.1 Pressure Control
Using the pressure control, the pads give you a different type of performance option on your Panda. You can control parameters
3.5.2 Pad Curve
The Pad Curve setting is used to set the response curve of all eight pads. It is not possible to set the response curve of the pads
0
20
40
60
80
100
120
140
1
2
3
4
5
6
7
8
9
10
0
20
40
60
80
100
120
140
1
2
3
4
5
6
7
8
9
10
0
20
40
60
80
100
120
140
1
2
3
4
5
6
7
8
9
10
0
20
40
60
80
100
120
140
1
2
3
4
5
6
7
8
9
0
20
40
60
80
100
120
140
1
2
3
4
5
6
7
8
9
0
20
40
60
80
100
120
140
1
2
3
4
5
6
7
8
9
3.5 Pad Control
3.5.3 Pads Note setting
Press one pad, then press assign. After that you shall press shift, then you can set the MIDI note by numeric buttons or +/- buttons.
3.7 NRPN/RPN setting
Assign the controller to 132~135,after that you can set the
NRPN OR RPN by numeric buttons.
12
and press ENTER to confirm.
Please consult Appendix D on Page 18 for full list.