2.5.6 MASTER VOLUME
It sends GM Master Volume message
（
F0 7F 7F 04 01 00 xx F7
）
2.5.7 PAD SETTING
3.1.1 DUAL
Dual switch function button.
When Dual is ON, the LCD displays the ‘DUAL
_
ON
',
Keyboard sends
MIDI
info of two channels, with the
voice/channel of both channels adjustable. The
2nd
voice and channel of 2 layer can be adjusted currently
(Dual is ON).
Dual and Split can not be used at the same time. When Dual is ON, Split is OFF.
3.1.2 SPLIT
Keyboard Split ON/OFF function button. When Split is ON, the LCD displays the’SPLIT
_
ON’. the keyboard is split
to right section and left section by the split point, with each section use it’s own channel. The voice /channel of both
channels is
adjustable. The voice and channel of right section can be adjusted currently(Split is ON),Dual and Split
can not be used at the same time. When Split is ON,Dual is OFF. The LCD displays the following:
SPLIT POINT
Default Split Point is the central C (MIDI No. 60). User can choose the Split Point. Hold the Split button,
LCD shows CHO, reminding user to select the SPLIT
POINT. Press the key that needs to be the new
Split Point, LCD shows don,
meaning this key is set to be the new Split Point.
Section 3. Advanced Settings
3.1 How to make good use of the keyboard
2.5.8Groups:A,B,C,D,E(49/61)
The button can be assigned as a controller, Press the ‘CTRL ASSIGN’ button, then press a button, the LCD
display ‘ctrldata1’, input the numb er of the controller that you wa nt to operate, press the 'enter' to confirm the value.
The LCD will display 'ctrldata2',at this moment, you can input the value that the controller should be send.
The LCD displays the following:
3.1.3 A. TOUCH
Channel
After Touch ON/OFF function button. When Touch is ON, the LCD shows ‘TOUCH
ON’
and the system sends Channel After Touch info when pressing the keys.
The LCD displays the following:
9
Activate a pad, Press the Ctrl Assign button .The LCD display will display the currently assigned controller
of the pad. The controller number 128 is for pad note. Press shift” to edit the Pad note. Enter the new pad
number you want the pad to assigned with the numeric button or +/- button.
”