HANGZHOU WORLDE DIGITAL PIANO CO.,LTD HANGZHOU WORLDE MUSIC ELECTRONIC CO., LTD
WEBSITE: WWW.WORLDE.COM.CN EMAIL:[email protected] TEL:86 571 88730848
- 9 -
1. Buttons/Scene Launch buttons
These buttons can transmit control change messages. Each button can be used to send continuous control data to a
desktop audio workstation or external MIDI device. When used with Ableton Live, these buttons are default as scene
launch buttons. It can also be assigned to other functions if required. When it’s used as Scene Launch buttons the
operation steps are as follows:
Pressing the Scene Launch buttons on the right side of your Orca PA64 will trigger horizontal rows of clips, also
known as ‘scenes’. These buttons allow you to launch, stop, and/or record multiple clips with one button, and are
fantastic for performance. Just like the 8x8 grid of pads, the Scene Launch buttons match the scene colours on your
Live screen.
2.
[Memory] button
Holding the memory button and pressing one of the pads to recall the parameters in Memory area.
Press the MEMORY button. The system enters the storing state, it stores 6 groups setup value.
3. Trigger pads
Pads can transmit note messages or control change messages. The pads can be used to trigger drum hits to our
software or hardware module. The pads are pressure and velocity sensitive, which makes them very responsive and
intuitive to play.
Use the Orca PAD64 Software Editor to select the backlit RGB color of 48 pads. We’ll show you how to select the
backlit RGB color of48 pads in section 5.2.
4. [Note] button
The 48 pads have dual modes: trigger pads mode and key note mode. Click the note button to start the note mode of
the 48 pads, press +/-button to increase or decrease the current note by semitone.
5. [Octave] button
Click the Octave button to start the Octave function, use+/-button to adjust Octave. Adjustment range is from 0 to 4.
Press DATA +/- buttons at the same time to set octave to initial 0
6. [A.Touch] button