HANGZHOU WORLDE DIGITAL PIANO CO.,LTD HANGZHOU WORLDE MUSIC ELECTRONIC CO., LTD
WEBSITE: WWW.WORLDE.COM.CN EMAIL:[email protected] TEL:86 571 88730848
- 10 -
Click the A.touch button to start the function of channel after touch and keyboard after touch. Channel after touch is on
when the LED color is red for the A.touch button. Keyboard after touch is on when it’s blue for the A.touch button.
When channel after touch in on, the system sends channel after touch info when pressing the pads. When keyboard
after touch in on, the system sends keyboard after touch info when pressing the pads.
7. [Channel] button
Click the channel button to start the channel function, use+/-button to select the channel. The initial setting is 1,
adjusting scale is 1~16.
8. [Velocity]button
Click the velocity button to start the velocity selection function, the medium(or normal) velocity is on when the LED
color of velocity button is green, heavy velocity is on when it’s in red color, and blue for constant velocity.
9.[Mute] button
Mute ON/OFF button. Click mute button will start the mute function. No message will be transmitted under Mute mode.
10.[Volume] button
It sends GM Master Volume message
（
F0 7F 7F 04 01 00 xx F7)..
11. [MMC] button
There are 6 buttons used for MMC-[|<<],[<<],[>>],[O],[stop],[play].It is common to set the 6 buttons as Sequencer
remote control buttons, it needs to be working with sequencer software.
12. [<] and [>] button
These buttons are used for navigating through fields of menus and options.
13. Full Sized USB connector
Connect the Orca PAD64 to your computer with a USB cable via this port.
14. [MIDI OUT] Connector
Use a five-pin MIDI cable to connect the MIDI OUT of the Orca PAD64 to the MIDI IN of an external device.
15. [MIDI IN] Connector
Use a five-pin MIDI cable to connect the MIDI OUT of an external MIDI device to the MIDI IN of the Orca PAD64.
