HANGZHOU WORLDE DIGITAL PIANO CO.,LTD HANGZHOU WORLDE MUSIC ELECTRONIC CO., LTD
WEBSITE: WWW.WORLDE.COM.CN EMAIL:[email protected] TEL:86 571 88730848
3.2.9 SHIFT BUTTON GROUPS(1-8/9-16)
Press EDIT button to enter keyboard multi-function mode. Press Shift button(1-8/9-16) to start the shift function, it can
switch the bank for pads and knobs.
3.3 Pad Control
3.3.1 Pressure Control
Using the pressure control, the pads give you a different type of performance option on your Blue Whale. You can control
parameters on your software in a way that would not be possible on a standard dial or slider. The pressure pads can
be used to make some very interesting effects.
As we’ve seen above, each pad can be assigned an individual MIDI controller number.
As you apply more and more pressure to the pad, the value of the controller you are sending will increase, until the
maximum value is reached. On release, the pad will return to the minimum value.
3.3.2 Pad Curve
The Pad Curve setting is used to set the response curve of all eight pads. It is not possible to set the response curve o
the pads independently.
To change the velocity curve:
Press EDIT button to enter keyboard multi-function mode. Press Pad Curve button to start the selection function of pad
curve. When this button is valid, the LED displays the Number of current pad curve. It can be adjusted by Value Dial. The
initial value is 1, adjusting scale is 01
～
016. Press Enter button to confirm. The operation steps and LED displays the
following:
(1)Press EDIT button to enter keyboard multi-function mode.
(2)Press the “PAD CURVE” button to start the selection function of pad curve and the LED displays the number of current pad curve.
(3)Rotate the Value Dial to adjust the pad velocity curve. The initial value is 01, adjusting scale is 01
～
06.
(4)Press the Enter button to confirm and the LED will display
Number of current pad curve. It will be saved and displayed for the current velocity curve
after resetting.
