Page 8
Long Screw Ø8 x 1 1/2" (1 pcs)
Mounting Bracket (1 pcs)
Nylon Strap (1 pcs)
Plastic Screw Anchor (1 pcs)
Anti Tip Kit
Assembly Instructions Enclosed
ANTI TIP KIT
Wall
H-3
H-4
H-5
H-6
Using a second person to assist you, place the unit in the desired final location against a wall mark the drill hole
positioning. Where possible, a wall stud should be used to secure the assembly. Move the assembly away from
the wall slightly and drill a pilot hole in the marked position. Insert the plastic screw anchor ( H-6).
Insert Long Screw (H-2) through Bracket (H-5) and into the corresponding hole in the wall using a phillips head
screwdriver ( not included ). Loop the Nylon Strap (H-3) through the pre-installed D-loop bracket on the console
table assembly and then through the Bracket (H-5) on the wall and cinch the strap closed. Anti-tip kit assembly
is now complete.
