Page 5
Assembly Steps
STEP 1
:
Attaching Leg (B) onto Table Top (A)
Using a second person to assist you, lay Table Top (A) upside down onto a padded, non-marring surface. Align
the holes on the first Leg (B) with corresponding holes on Table Top (A) as shown. Secure the Leg (B) using
Allen Bolts (H-2) and Spring Washers (H-1) , stacking the hardware in the order shown. Engage all bolts by
hand first , then fully tighten them using Allen Key (T-1).
Repeat the process above to install the second Leg (B)
T-1
H-2
H-1
A
B
B
NOTE : Levelers on the bottoms of the Leg
Bases may be used for additional leveling
adjustment if needed
STEP 2
Using a second person to assist you, turn the assembly upright as shown.
Congratulations, the Assembly is now complete and the product is ready for use
INSIDE
INS
IDE
IN
SID
E
