Step 1
Page 5
(H-2) Medium Bolt x 12
(H-4) Lock Washer
x
12
Assembly Steps
Step 2
(H-5) Flat Washer
x
12
(T-1) Wrench x 1
Using a second person to assist you place Top Frame (A) upside down onto a padded, non-marring surface.
Carefully lower Leg Frame (B) down into position on Top Frame (A) as illustrated. Secure Leg Frame (B) to Top
Frame (A) using Medium Bolts (H-2), Lock Washers (H-4) and Flat Washers (H-5), stacking the hardware in the
order shown. Engage all bolts by hand, then fully tighten using Wrench (T-1).
Carefully lower the Support Stretcher (C) down into position on Top Frame (A) as illustrated. Secure the Support
Stretcher (C) to Leg Frame (B) using Short Bolts (H-2), Lock Washers (H-4) and Flat Washers (H-5); and secure
the Support Stretcher (C) to Top Frame (A) using Long Bolts (H-3), Lock Washers (H-4) and Flat Washers (H-5);
stacking the hardware in the order shown. Engage all bolts by hand, then fully tighten using Wrench (T-1).
(H-1) Short Bolt x 2
(H-4) Lock Washer
x
4
(H-5) Flat Washer
x
4
(T-1) Wrench x 1
(H-3) Long Bolt x 2
B
A
H-2
H-4
H-5
H-1
H-4
H-5
T-1
H-3
H-4
H-5
T-1
C
B
A
B
x12
x2
x2
T-1
DO NOT insert bolts
in middle holes
B
NOTE:
DO NOT insert bolts in middle holes.
