Installation Instructions
H-1
Step-1 :- Pre-drill hole on desired loca on.
Insert Wall Plug (H-1) into the pre-drilled
holes as shown in the drawing.
Wall
H-2
T-1
H-1
Step-1
Barrel w/Screw
Step-2
Step-3
Note : Each Floating Hook can take maximum load of 4 lbs
Page-3
Assembled View
Step-2 :- Unscrew barrel from the Hook by
rota ng it counter clockwise. Insert Screw
(H-2) into the barrel, align over installed Wall
plug (H-1) and fully ghten Screw (H-2) with
Screwdriver (T-1) (not included).
Step-3 :- Align Hook over barrel and rotate
clockwise un l secured.
Repeat above steps to install other Hooks as
desired.
