World Helmsman WH-M100, User Manual

Page: 4 / 12

4
WH-M100/ WH-M150/ WH-M300/ WH-M500 network camera
User Manual
When using 20AWG (Belden 8760) Shielded Twisted Pair Cable, different control Baud Rate will have
different transmission distance performance, the ideal is as below table:
Baud rate Max. Transmission Distance
2400 1200 meters
4800 1000 meters
9600 800 meters
More details will be given in the follow-up sections
4. Setting of Camera Position Code
Prior to installation, setup ID address and communication protocol of your camera firstly, and then
you can install it. While when re-setting of ID or protocol is necessary after installation, please avoid
such resetting when power of camera is “ON” and please POWER-OFF firstly the camera before
resetting, then this new resetting will become valid.
5. Self Test of Camera
Before installing this camera, please execute camera self-testing as following: when powering on the
dome camera, it will automatically execute tilt up/down scanning, then pan horizontal scanning for
around 20~30 seconds, then camera will stop at the Preset Point 1. Upon completion of these, the
speed dome PTZ camera is in normal condition.
6. Please keep the original packaging
After unpacking the dome camera, take good care of the original packaging. In case any problem
occurred, it can be used to re-pack cameras for returning to the local distributor or manufacturer for
repair.
7. Remove protection materials before supplying power to the camera, so as to prevent it from
faulty operation or causing mechanical errors.
8. Indoor mini speed dome PTZ camera parts bag
a. Installation manual 1.pcs
b. Quick-installation plate 2.pcs
c. Signal-Power cable 1.pcs