15
Repair
If any irregularity is detected during operation, stop the pump and check it. Refer to the section on
“Troubleshooting”.
1. To request a repair service, ask your supplier or us.
2. Before requesting a repair service, read this instruction manual carefully and check it, again.
3. When requesting a repair service, provide the following information:
⚫
Pump model and serial number
⚫
The period of use and the condition
⚫
The failure parts and the condition
⚫
Type of liquid (name, specific gravity, temperature, any slurry or not)
Clean the inside of the pump adequately when returning it, because if the residual liquid leaks out during
shipment, it creates a hazardous condition.
Use names in the parts table (P6) to order for replacement or spare parts. Nevertheless, also provide the
part number and the material just in case.
Model:
Purchase date:
Serial No.
Date to start:
Supplier:
Notice: When repairing, consult your supplier. Wash the wet parts kit for the returned pump adequately
and pack it.
