WORLD-CCTV 722RIII-IP, User Manual, Page: 94 / 95

Page 94 of 95
At any time through recording, input “ FOCUS+ ” to record pattern. Input “ FOCUS- ” to
abandon pattern recording.
19. Group Setup
GROUP NUMBER: 1/5 The camera supports 32 pieces group function; this item be used to
set one series number of group;
SETUP: “ X000 ” means the function still not be selected; if preset be selected,
will show “ P1-P128 ” ; if swing be selected, will show “ S1-S5 ” ; if pattern
be selected, will show “ T1-T4 ” ;
CLEAR GROUP: To cancel the group setup;
RUN GROUP: To run group.
20. Privacy Setup (SONY camera module only)
PRIVACY NUMBER: 1/8 Support 8 pieces privacy zone masking. This item be used to set
one series number of every privacy masking zone;
PRIVACY ENABLE: ON/OFF This item be used to enable masking to work or not;
PRIVACY WIDE: 000 To setup the width of masking zone (1-999);
PRIVACY HIGH: 000 To setup the height of masking zone (1-999).
After the setup of masking of privacy zone, when you move the camera to this position, you
will find this zone already be covered by masking. The series number of masking will be
shown at the center of masking. Totally support 8 pieces privacy zone masking. Please
notice: Sometimes, because of the lower speed of screen showing and the Min. illumination
is decided by the size of signal character, may lead to position mistake.